manualshive.com logo in svg

Black Box MT1000A-13, Руководство пользователя, Страница: 35 / 44

Поделиться
Скачать
Black Box MT1000A-13 Скачать руководство пользователя страница 35

T1 AND E1 FIBER MUXES

34

5.5 Viewing Hardware and Software Updates

To view the last hardware and software updates:

1. In the Main Fibermux menu, choose option 4, Version information. The Version Information screen appears

(see Figure 5-14).

VERSION INFORMATION

-------------------

Hardware revision is 

C

Software version is 

2.24

0.Exit. 

Figure 5-14. Version Information screen.

2. Choose 0, Exit, to exit to the Main Fibermux menu.

5.6 Downloading Software

To download a new software revision:

1. In the Main Fibermux menu, choose option 5, Software download. The Software Downloading screen

appears (see Figure 5-15).

SOFTWARE DOWNLOADING

--------------------

0. Exit.

1. 

Download new software.

Enter a choice :

Figure 5-15. Software Downloading screen.

2. Choose option 1, Download new software.

3. Type 

flash

and press <Enter> to confirm downloading. The mux resets itself and erases the flash memory.

4. When prompted, enter the downloading command. The new software version is loaded to the flash memory

and the mux is initialized.

5. Choose 0, Exit, to exit to the Main Fibermux menu.

Содержание MT1000A-13













































Отзывы:

Нет отзывов