CHAPTER 5: Management
29
CONFIGURATION
-------------
0.
Exit.
1.
View interface configuration.
2.
Change local interface configuration.
3.
Change remote interface configuration.
4.
Special configuration actions.
5.
Reset to default configuration.
Enter a choice :
Figure 5-7. Configuration screen.
2. Choose option 1, View interface configuration. The View Interface Configuration screen appears. The
screen shows whether any loop is connected in the local or remote mux (see Figure 5-8).
VIEW INTERFACE CONFIGURATION
----------------------------
-----------------------------------------------------------------
| Interface
|
Local |
Remote
|
-----------------------------------------------------------------
|
T1 channel 1
|
Normal
|
Normal
|
|
T1 channel 2
|
Normal
|
Normal
|
|
T1 channel 3
|
Normal
|
Normal
|
|
T1 channel 4
|
Normal
|
Normal
|
| T2
main
|
Normal
|
Normal
|
|
T2 backup
|
Not present
|
Not present
|
-----------------------------------------------------------------
0.Exit.
Figure 5-8. View Interface Configuration screen.
NOTE
On E1 versions, the screen’s T1 and T2 entries are replaced by E1 and E2.
The states associated with each mux are:
• Normal
No loopback is connected.
• Loop
A local loopback is set in the local or remote mux.
• Remote Loop
A remote loopback is set in the local or remote mux.