40
MINISTAT-FOUR
Code Q is used to return to the loop-selection screen from which this screen was
accessed.
The CURRENT STATE line shows the current loop status.
Procedure:
To change the condition of the test loop, type the appropriate code number.
After completing the required actions, type
Q
to return to the loop-selection screen
from which this screen was accessed.
19. REMOTE MINISTAT-FOUR CONFIGURATION Menu
Purpose:
Select screens that provide system-management functions, including
configuration tasks, related to the remote MiniStat-Four.
Description:
Code Item
Description
1
TRANSFER CONFIGURATION
Used to initiate transfer
FROM REMOTE TO LOCAL
of current remote MiniStat-
Four configuration to the local
MS-4. After remote configur-
ation is received by the local
MS-4, it can be examined
using the terminal connected
to the local MS-4. The
configuration data in the local
unit serves as a backup that
can be down-loaded back to
the remote MiniStat-Four in
case that unit is replaced.
2
TRANSFER CONFIGURATION
Similar to item 1 except that
FROM LOCAL TO REMOTE
it is used to initiate transfer of
the current local MiniStat-Four
configuration to the remote
MiniStat-Four.
