25
CHAPTER 4: Configuration
• STEP 5. If the password is accepted, the MiniStat-Four sends the main menu
(See Figure 4-4).
• STEP 6. You can now start the actual configuration session.
Figure 4-4. Main menu.
From this point on, whenever you want to end the configuration session, press
Q
as
many times as necessary, or press
ESC
(escape), to obtain the following message:
EXIT COMMAND MODE
MINISTAT-FOUR IN NORMAL MODE
4.5 Configuration Procedure
The following subsections present the menus and the data-entry screens contained
in the configuration program. These subsections describe menu and screen
purpose, explain how to fill in the desired data, and present any supplementary
information that may be required.
Table 4-3 lists the available menus and screens, as well as their index numbers to
aid you in locating them in the text that follows each screen.
COMMAND MODE IS ACTIVATED VIA CH
MAIN MENU
0) SYSTEM CONFIGURATION
1) SUBCHANNEL 1 CONFIGURATION
2) SUBCHANNEL 2 CONFIGURATION
3) SUBCHANNEL 3 CONFIGURATION
4) SUBCHANNEL 4 CONFIGURATION
5) DIAGNOSTICS
6) EXIT TO NORMAL OPERATION
SELECT YOUR CHOICE (0-5)
