38
MINISTAT-FOUR
Code Q is used to return to the SUB-CHANNEL CONFIGURATION screen.
The CURRENT STATE line shows the current status of end-to-end hardware flow
control.
Procedure:
To change the status of end-to-end hardware flow control used on this sub-
channel, type the appropriate code number. The new selection appears in the
CURRENT STATE line.
Type
Q
to return to the SUB-CHANNEL CONFIGURATION screen
14. DIAGNOSTICS Menu
Purpose:
Select the control screens for the various test loops that can be activated
from the local MiniStat-Four for diagnostic purposes. See
Chapter 6
for a
description of the test loops.
Description:
Code numbers 1 through 3 are used to select the desired test loop type: (1) local
loop, (2) remote loop, and (3) modem loop.
When you first enter the DIAGNOSTICS menu, the CURRENT STATE line shows:
ALL TESTS IN THE OFF STATE.
Code Q is used to return to the MAIN MENU screen.
Procedure:
Type the code number corresponding to the desired test-loop type.
Type
Q
to return to the MAIN MENU screen.
15. LOCAL LOOPS Screen
Purpose:
View the current status of the local sub-channel and composite channel
loops and go, if desired, to the control screen for any of these loops.
Description:
Code numbers 1 through 5 list the available local loops: composite loop and loops
for each sub-channel.
Code Q is used to return to the DIAGNOSTICS screen.
