31
CHAPTER 4: Configuration
Procedure:
To change the current selection, type the code number corresponding to the
desired character: always check that this character is different from the X-ON
control character.
To exit with or without change, type
Q
. You will return to the SYSTEM
CONFIGURATION menu.
5. MODIFY PASSWORD Screen
Purpose:
Select a new password. The new password is activated after its verification.
Description:
The screen prompts you to enter the new password (any two characters, except the
characters serving as X-ON and X-OFF flow-control characters), or exit to the
SYSTEM CONFIGURATION menu.
Procedure:
1. Type the desired password. You will receive the following message:
ENTER NEW PASSWORD AGAIN FOR VERIFICATION
2. Type the same characters again.
3. If no difference is found, the new password is accepted and you will receive
the following message:
NEW PASSWORD HAS BEEN ACTIVATED
ENTER ANOTHER PASSWORD (two characters) OR PRESS Q TO
EXIT
4. If the password need not be changed again, press
Q
to return to the SYSTEM
CONFIGURATION menu. Otherwise, repeat the password-entry procedure.
5. If the two passwords differ, no change is made, and the following message is
presented:
INCORRECT VERIFICATION, PASSWORD HAS NOT BEEN CHANGED
ENTER NEW PASSWORD (two characters) OR PRESS Q TO EXIT
You will have to either repeat the procedure or quit.
