10
2-WIRE IDSL LINE DRIVER RACK CARDS
3. Configuration
This chapter describes the hardware and software configuration switches and
jumpers. Refer to the Managed Micro Rack SNMP/HTTP Card (RM261C-SNMP)
users’ manual for SNMP options.
3.1 Hardware Setup
The 2-Wire IDSL Line Driver front card defaults to the use of hardware switches
for configuration. The front card has an interface driver board, two eight-position
DIP switches, and one 4-position DIP switch (see Figure 3-1).
Figure 3-1. Configuration switches and the interface driver board
on the front card.
Interface driver board
