20
2-WIRE IDSL LINE DRIVER RACK CARDS
Main Menu Option 2: Display Hardware Configuration
Select Option 2 to display the configuration of the hardware DIP switches. To use
the Hardware Configuration for the Active Configuration, select Main Menu
Option 5. Then select “Use Hardware DIP-Switches.” Finally, select Main Menu
Option 8 to save.
Figure 3-6. Display hardware configuration.
Main Menu Option 3: Display Software Configuration
Select Option 3 to display the configuration of the software switches. To use the
software configuration for the active configuration, select Main Menu, Option 5.
Then select “Use Software Switches.” Finally, select Main Menu Option 8 to save.
Figure 3-7. Display software configuration.
SOFTWARE CONFIGURATION—Esc to Main Menu
Configuration Control:
Hardware
DTE Rate:
64 kbps
Data Format:
Synchronous
Clock Mode:
Internal
DSR during Local Line Loop:
Enabled
Response to Remote Digital Loop:
Enabled
DTE controlled Local Line Loop:
Disabled
DTE controlled Remote Digital Loop:
Disabled
