Black Box MD1650A-JP, Справочное руководство

Страница: 20 / 56

V.92 DIALUP 2-WIRE OR 4-WIRE LEASED-LINE DATA/FAX MODEM AT COMMANDS GUIDE
18
Command: -K n MNP Extended Services
Values: n = 0, 1, or 2
Default: 0
Description: Enables or disables conversion of a V.42 LAPM connection to an
MNP 10 connection.
-K0
Disables V.42 LAPM to MNP 10 conversion.
-K1 Enables V.42 LAPM to MNP 10 conversion.
-K2 Enables V.42 LAPM to MNP 10 conversion; inhibits MNP
Extended Services initiation during V.42 LAPM answer mode
detection phase.
Command: ** Flash Memory Download
Values: 0, 1, or 2
Description: **0 Initiates download to flash memory at the last sensed speed.
**1 Initiates download to flash memory at 38.4 kbps.
**2 Initiates download to flash memory at 57.6 kbps.
Command: *B View Numbers in Blacklist
Values: N/A
Description: If blacklisting is in effect, AT*B displays a list of numbers for which the
last call attempted in the previous two hours failed. Permanently
forbidden numbers as defined by country requirements do not appear
in this list. If no numbers are blacklisted, only the OK result code is
displayed.
Command: *D View Delayed Numbers
Values: N/A
Description: AT*D displays a list of delayed numbers, as defined in the *B
command, together with their delay times. If no numbers are delayed,
only the OK result code is displayed.
Command: $C n Key Abort
Values: n = 0, 1
Default: Key abort will work for both originate and answer. The value can be
stored.
$C0
Disables key abort.
$C1 Enables key abort.
Command: $SB n Serial Port Baud Rate
Values: n = speed in bits per second
Default: 57600
Description: $SB300 Sets serial port to 300 bps.
$SB1200 Sets serial port to 1200 bps.
$SB2400 Sets serial port to 2400 bps.
$SB4800 Sets serial port to 4800 bps.
$SB9600 Sets serial port to 9600 bps.
$SB19200 Sets serial port to 19,200 bps.
$SB38400 Sets serial port to 38,400 bps.
$SB57600 Sets serial port to 57,600 bps.
$SB115200 Sets serial port to 115,200 bps.