Black Box MD1650A-JP, Справочное руководство

Страница: 41 / 56

CHAPTER 5: S-Registers
39
S-Reg Unit Range Default Description
S12 20 ms 0–255 50 Escape Prompt Delay (EPD): Defines the maximum
period, in fiftieths of second, allowed between receipt of
the last character of the three escape character sequences
from the computer and the sending of the OK result code
to the computer (escape code guard time).
S13 decimal 0, 1–127 42(*) Remote Configuration Escape Character: Sets the ASCII
code for the remote configuration escape character.
ATS13=0&W disables remote configuration.
S15 minutes 0, 10–255 30 Dialup Backup: Sets the length of time the modem waits
after making a dial-up connection before it checks for a
restored leased line. Zero disables dial backup.
S17 minutes 0–255 1 Dialup Connection: Sets the length of time the modem
waits after a leased line fails before it attempts a dialup
connection.
S24 seconds 0–255 0 Sleep Inactivity Timer: Sets the number of seconds that the
modem operates in normal mode with no detected
telephone or serial port activity before it enters low-power
sleep mode. The timer is reset upon any serial port or
telephone line activity.
S25 10 ms 0–255 5 Delay to DTR OFF: Sets the length of time that the
(async) modem1 ms (sync) ignores DTR while taking the action
specified by &D.
S26 10 ms 0–255 1 RTS to CTS Delay: When &R0 is commanded, sets the time
after detecting an OFF-to-ON transition on RTS before the
modem turns CTS ON. Applies to synchronous operation
only.
S29 10 ms 0–255 70 On Hook Time: Sets the length of time that the modem
goes on-hook when it encounters a flash dial modifier (!)
in the dialing string.
S30 10 ms 0, 1–255 0 Disconnect Inactivity Timer: Sets the length of time that
the modem waits before disconnecting when no data is sent
or received. A value of zero disables the timer. Applies to
asynchronous operation only.