background image

CHAPTER 6: Result Codes

47

Terse

Verbose

Description

78

+MRR: 31200

Connected at 31,200 bps; carrier reporting enabled. (See S95, X

n

.)

79

+MRR: 33600

Connected at 33,600 bps; carrier reporting enabled. (See S95, X

n

.)

80

+ER: ALT

Connected in MNP mode. Sent when the modem connects in MNP mode
of error correction. +ER: message reporting has been enabled. (See S95,
W

n

, X

n

.)

83

LINE-IN-USE

Line in use. Modem attempted to go off-hook when an extension was
already occupying the line.

84

CONNECT 33600 Connected at 33,600 bps. Modem connects to the line, the DTE speed is

33,600 bps, and the DTE speed reporting is enabled.

91

CONNECT 31200 Connected at 31,200 bps. Modem connects to the line, the DTE speed is

31,200 bps, and the DTE speed reporting is enabled.

134

+MCR: B103

Connected with Bell 103 modulation. (See +MR, S95, X

n

.)

135

+MCR: B212

Connected with Bell 212 modulation. (See +MR, S95, X

n

.)

136

+MCR: V21

Connected with ITU-T V.21 modulation, and modulation reporting is
enabled. (See +MR, S95, X

n

.)

137

+MCR: V22

Connected with ITU-T V.22. modulation, and modulation reporting is
enabled. (See +MR, S95, X

n

.)

138

+MCR: V22B

Connected with ITU-T V.22B modulation, and modulation reporting is
enabled. (See +MR, S95, X

n

.)

139

+MCR: V23

Connected with ITU-T V.23 modulation, and modulation reporting is
enabled. (See +MR, S95, X

n

.)

140

+MCR: V32

Connected with ITU-T V.32 modulation, and modulation reporting is
enabled. (See +MR, S95, X

n

.)

141

+MCR: V32B

Connected with ITU-T V.32B modulation, and modulation reporting is
enabled. (See +MR, S95, X

n

.)

142

+MCR: V34

Connected with ITU-T V.34 modulation, and modulation reporting is
enabled. (See +MR, S95, X

n

.)

145

+MCR: V90

Connected with ITU-T V.90. Modem connects to the line with ITU-T V.90
modulation, and modulation reporting is enabled. (See +MR, S95, X

n

.)

150

+MRR: 32000

Connected at 32,000 bps and carrier reporting is enabled. (See S95, X

n

.)

151

+MRR: 34000

Connected at 34,000 bps and carrier reporting is enabled. (See S95, X

n

.)

152

+MRR: 36000

Connected at 36,000 bps and carrier reporting is enabled. (See S95, X

n

.)

Содержание MD1650A-JP

























































Отзывы: