114
MINI-MODEM (56 KBPS DATA/FAX MODEM)
If N0 command is active, S37 = 10 updates the
+MS command subparameters to rMS =
10,1,300,12000.
IF N1 command is active, S37 = 10 updates the
+MS command subparameters to rMS =
10,0,12000,12000.
S37 is not updated by the +MS command. Use of
the +MS command is recommended instead of the
Nn and S37 = x commands, but Nn and S37 = x
commands are supported for compatibility with
existing communications software.
0 = Attempt automode connection. If N0 is active,
connection is attempted at the most recently
sensed DTE speed (+MS command settings are
updated to the most appropriate values). If N1
is active, connection is attempted at the highest
possible speed (+MS settings are updated to
11,1,300,2880 to reflect V.34, automode, 300 bps
minimum speed, and 28800 bps maximum
speed)—Default.
