Black Box LW0050A Скачать руководство пользователя страница 60

Страница: 60 / 146

PRO 11 SERIES WIRELESS ETHERNET

•

Undo –

Causes the window to display currently active values. This is useful if

you started changing values and you want to start again from the current
values.

•

Cancel –

Closes the window without implementing any changes you made.

•

Apply –

Implements any changes you made but leaves the window open.

4.5.1 S

TATION

TATUS

The

Station Status

tab of the

Wireless LAN Configuration

utility displays

information regarding the Adapter and its status.

The

Station Status

tab contains the following parameters:

•

Network Type –

In the current version, the value of this parameter should be

always set to

Infrastructure

•

Firmware Version –

Displays the version of unit’s current firmware (internally

installed software). The first two numbers of the firmware and driver versions
should be identical. The remaining numbers (if any) indicate the minor
version. The final letter indicates the hardware version.

•

Driver Version –

Displays the version of unit’s current driver.

•

MAC Address –

Displays the unit’s unique IEEE MAC address.

•

BSS Address –

The MAC address of the Access Point with which the unit is

currently associated.

•

Station Status –

Current status of the unit.

Scanning –

The unit is searching for an Access Point with which to associate.

Associated –

The unit is associated with an Access Point and has adopted the

attached PC MAC address.

•

WEP Enabled –

Wired Equivalent Privacy (WEP) is an authentication algorithm

which protects authorized Wireless LAN users against eavesdropping. WEP is
defined in the 802.11 standard.

NOTE

Parameter changes take effect only after reset.

Содержание LW0050A


















































































































































Результаты поиска

Содержание LW0050A

Отзывы:

Бренды по названию

Популярные бренды

Black Box LW0050A, Руководство пользователя

Результаты поиска

Содержание LW0050A

Отзывы:

Бренды по названию

Популярные бренды