23
CHAPTER 2: Basic Installation
2.5 Connect the Unit to the Ethernet Port
• Connect one end of an Ethernet 10BASE-T cable (not supplied) to the RJ-45
port on the rear panel of the unit (marked UTP).
• Connect the other end of the connector cable to the Ethernet outlet:
When connecting a Single-Port Station Adapter or Four-Port Station
Adapter to a PC, use a straight cable.
When connecting an Access Point or Ethernet Workgroup Bridge to a
LAN, use a straight cable.
When connecting an Access Point or Ethernet Workgroup Bridge to a
PC, use a crossed cable.
When connecting an Access Point to a Ethernet Workgroup Bridge, use
a crossed cable.
2.6 Check LED Indicators
Verify that the unit is functioning correctly via the front-panel LEDs. The following
tables describe the front-panel LEDs for Station Adapters, Bridges, and Access
Points.
2.6.1 LED
S ON
S
TATION
A
DAPTERS AND
B
RIDGES
Name
Description
Meaning
PWR
power supply
On – After successful power-up
Off – Power off
WLNK WLAN Link
On – Unit is synchronized or associated with an
Access Point
Off – Unit is not synchronized or associated with an
Access Point
ETHR Ethernet activity
On – Reception on Ethernet port
Off – No reception on Ethernet port
Содержание LW0050A
Страница 2: ......
