Black Box LR9501A, Быстрый старт

Страница: 14 / 93

11
QUICK-START GUIDE
6. On the Broadband Router Status page, check the Internet Connection Status
section for the field labeled Cable/DSL. Make sure that the status says
Connected
.
• If it says Connected, you have successfully obtained an IP address from
your DSL service provider. You may proceed with using the Router and
Internet service as desired.
• If it says Disconnected, go to the next step.
7. Power OFF the DSL modem and the Broadband Router.
8. Power ON the DSL modem and the Broadband Router.
9. Connect to the Broadband Router’s configuration interface by entering
http://192.168.2.1 and pressing Enter.
10. On the Broadband Router Status page, check the Internet Connection Status
section for the field labeled Cable/DSL. Make sure that the status says
Connected
.
• If it says Connected, you have successfully obtained an IP address from
your DSL service provider. You may proceed with using the router and
Internet service as desired.
• If it says Disconnected, go to the next step.
11. Troubleshooting:
• Make sure that the DSL modem is securely connected to the Router.
The modem should be powered ON and functioning properly.
• Make sure that the username and password entered are accurate.
(Verify with your DSL service provider, if necessary.)
• Upgrade the Broadband Router’s firmware to the latest version available.
C
ONNECTION
C
ONFIGURATION FOR
@H
OME
C
ABLE
M
ODEM
S
ERVICE
U
SERS
1. Obtain your exact Host Name from @Home or your Windows Network
Control Panel.
2. Connect to the Broadband Router’s configuration interface by entering
http://192.168.2.1 and pressing Enter.
3. You will see the Broadband Router Status screen. Select Simple Setup from
the left-side menu. Choose WAN from the expanded menu.