Black Box LR120A, Руководство по началу работы

Страница: 96 / 128

Introduction 91
WAN Access Routers Getting Started Guide 10 • System Configuration
Introduction
The System Configuration item on the Configuration Menu opens to provide access to the following:
• Authentication: allows you to control access to the Black Box’s console and web configuration pages.
• Alarm: shows the Alarm Table and CPU Usage Settings. You can configure the alarm severity for each of the
alarms and enable/disable the Alarm Error Log.
• Remote Access: enable and set the time limit for a remote user to have access to the Black Box.
• Update: update the Black Box software from here.
• Save: to save the Black Box configuration in non-volatile memory.
• Backup/Restore: used to save the Black Box’s configuration on a PC or to load a configuration already saved
on a PC.
• Restart: to do a soft start of the Black Box or to restore the Black Box to factory defaults.
• Key: the key version is used to identify which features are installed in the Black Box.
• Website Settings: configures the refresh rate of the web pages.
• Error Log: displays the Syslog Settings and shows recent configuration errors from the Black Box.
• SNMP Daemon: to modify the SNMP parameters for the Black Box.
• Tools: provides ‘ping’ and ‘traceroute’ commands from the Black Box. Also used to clear the interface table
counters.
Detailed Description
Authentication
The Black Box manager controls access to the Black Box’s console and web pages. The default defined user is
superuser. See
figure 70 .
Figure 70. Authentication web page showing default superuser
The superuser is the default administrative user and is given authority to configure the Black Box, but the
default settings have disabled the ability to authenticate through a remote connection. To enable remote access
authentication, click on Edit user...