Black Box LR120A, Руководство по началу работы

Страница: 101 / 128

Detailed Description 96
WAN Access Routers Getting Started Guide 10 • System Configuration
Restart
From this webpage, you can do a soft reboot of the Black Box or restore the Black Box to factory defaults. To
restore to factory defaults, click on the box for Reset to factory default settings. (See
figure 78 .) Then click on the
Restart button. No warning is given before beginning the reboot process. You will need to configure the IP
address of the Ethernet port again as described in chapter 3,
“Initial configuration” on page 22.
Figure 78. Restoring to factory defaults
Website Settings
The refresh rate of the webpages is a configurable parameter. Enter the desired refresh rate (in seconds) and
click on the
Update button. Default value is 4 seconds. (See figure 79 .)
Figure 79. Webpage refresh rates