Black Box LPB5028A, Руководство пользователя

Страница: 96 / 244

724-746-5500 | blackbox.com
Page 96
Chapter 5: Configuration
5.7.2 MVR Port Group Allow Configuration
The section describes how to add the IP Multicast Group to receive the multicast stream. Entries in the MVR port group allow
table are shown on this page. The MVR Port Group Table is sorted first by port, and then by IP address.
Web Interface
To display the MVR Groups Information in the web interface:
1. Click Configuration, MVR, Port Groups Allow.
2. To add the new allowed group, click the “Add new Allow Group” button.
3. Select the “Port No.,” “Start Address,” and “End Address.”
3. Click “Apply” to apply the configuration of MVR Port Group Allow Table.
Figure 5-40. MVR Groups Information screen.
Parameter description:
• Delete: Check to delete the entry. It will be deleted during the next apply.
• Port: The logical port for the settings.
• Allow Groups: The IP Multicast Group that will be allowed.
• Adding New Allow Group: Click “Add New Allow Group” to add a new entry to the Group Allow table. Specify the Port, and
Allow Group of the new entry. Click “Apply.”
• Buttons:
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
5.7.3 Groups Information
The section describes how to display the MVR Groups detail information on the switch. Entries in the MVR Group Table are
shown on this page. The MVR Group Table is sorted first by VLAN ID, and then by group.