Black Box LPB5028A, Руководство пользователя

Страница: 186 / 244

724-746-5500 | blackbox.com
Page 186
Chapter 6: Security
• Buttons:
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
6.1.2 Static Table
The section describes how to configure the Static IP Source Guard Table parameters of the switch. You can use the Static IP
Source Guard Table to manage the entries.
Web Interface
To configure a Static IP Source Guard Table Configuration in the web interface:
1. Click “Add new entry.”
2. Specify the Port, VLAN ID, IP Address, and MAC address in the entry.
3. Click Apply.
Figure 6-2. Static IP Source Guard Table.
Parameter description:
• Delete: Check to delete the entry. It will be deleted during the next save.
• Port: The logical port for the settings.
• VLAN ID: The vlan id for the settings.
• IP Address: Allowed Source IP address.
• IP Mask: Use this to calculate the allowed network with IP address.
• MAC address: Allowed Source MAC address.
• Adding new entry: Click to add a new entry to the Static IP Source Guard table. Specify the Port, VLAN ID, IP address, and IP
Mask for the new entry. Click “Apply.”
• Buttons:
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.