Black Box LPB5028A, Руководство пользователя

Страница: 101 / 244

724-746-5500 | blackbox.com
Page 101
Chapter 5: Configuration
Web Interface
To show LLDP neighbors:
1. Click LLDP Neighbors.
2. Click Refresh for manual update web screen.
3. Click Auto-refresh for auto-update web screen.
Figure 5-44. LLDP Neighbors information screen.
NOTE: If your network without any device supports LLDP then the table will show “No LLDP neighbor information found.”
Parameter description:
• Local Port: The port on which the LLDP frame was received.
• Chassis ID: The Chassis ID is the identification of the neighbor’s LLDP frames.
• Remote Port ID: The Remote Port ID is the identification of the neighbor port.
• System Name: System Name is the name advertised by the neighbor unit.
• Port Description: Port Description is the port description advertised by the neighbor unit.
• System Capabilities: System Capabilities describes the neighbor unit's capabilities. The possible capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is disabled, the capability is followed by (-).
• System Description: System Description is the port description advertised by the neighbor unit.
• Management Address: Management Address is the neighbor unit's address that is used for higher layer entities to assist
discovery by the network management. For example, this could hold the neighbor’s IP address.
• Auto-refresh: Select the auto-refresh icon and the device will refresh the information automatically.
• Upper right icon (Refresh): Click on this icon to refresh the LLDP Neighbors information manually.