Black Box LPB5028A, Руководство пользователя

Страница: 219 / 244

724-746-5500 | blackbox.com
Page 219
Chapter 6: Security
Parameter description:
• Mode: Indicates the HTTPS mode operation. Possible modes are:
Enabled: Enable HTTPS mode operation.
Disabled: Disable HTTPS mode operation.
• Automatic Redirect: Indicates the HTTPS redirect mode operation. Automatically redirect web browser to HTTPS when HTTPS
mode is enabled. Possible modes are:
Enabled: Enable HTTPS redirect mode operation.
Disabled: Disable HTTPS redirect mode operation.
6.11 Auth Method
This page shows how to configure a user as authenticated when he logs into the switch via one of the management client
interfaces.
Web Interface
To configure a Authentication Method Configuration in the web interface:
1. Specify the Client (console, telent, ssh, web) that you want to monitor.
2. Specify the Authentication Method (none, local, radius, ).
3. Check Fallback.
4. Click Apply.
Figure 6-28. HTTPS Configuration screen.
Parameter description:
• Client: The management client for which the configuration below applies.
• Authentication Method: Authentication Method can be set to one of the following values:
- none : authentication is disabled and login is not possible.
- local : use the local user database on the switch for authentication.
- radius : use a remote RADIUS server for authentication.
- : use a remote server for authentication.
• Fallback: Enable fallback to local authentication by checking this box.
If none of the configured authentication servers are alive, the local user database is used for authentication.
This is only possible if the Authentication Method is set to a value other than “none” or “local.”