Black Box LPB5028A, Руководство пользователя

Страница: 16 / 244

724-746-5500 | blackbox.com
Page 16
Chapter 3: Operation of Web-based Management
3. Operation of Web-based Management
3.1 Initial Configuration
This chapter explains how to configure and manage the LPB5028A or LPB5052A through the Web user interface. You can easily
access and monitor through any one switch port the switch status, including MIBs status, each port activity, Spanning tree status,
port aggregation status, multicast traffic, VLAN and priority status, even illegal access record and so on.
The default values of the LPB5028A are listed in the table below:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
Username: admin
Password: blank
Password
After you configure the LPB5028A, you can browse to it. Type http://192.168.1.1 in the address row in a browser, and you will see
the login screen prompting you for the username and password to login and access authentication.
The default username is “admin” and password is empty. The first time you use the switch, enter the default username and pass-
word, and then click on the <Login> button. The login process now is completed.
NOTE: In the login menu, you have to input the complete username and password respectively; the LPB5028A will not give you a
shortcut to username automatically. This looks inconvenient, but is safer.
This supports a simple user management function allowing only one administrator to configure the system at a time. If two or
more users are using administrator’s identity, it will allow only the one who logs in first to configure the system. The rest of the
users, even with administrator’s identity, can only monitor the system. Users who have no administrator’s identity can only moni-
tor the system, and a maximum of three users can login simultaneously to the LPB5028A or LPB5052A.
NOTE: When you login to the switch to manage it, you must first type the username, which, by default, is admin. The password is
blank, so after you type admin, press enter. The Web management page will appear.
You can manage the LPB5028A or LPB5052A switch Web UI via both ipv4 and ipv6. To optimize the display effect, we
recommend you use Microsoft IE 6.0 and above, Netscape V7.1 and above, or FireFox V1.00 and above with 1024 x 768
resolution. The switch supports a neutral Web browser interface.
NOTE: To enable the DHCP function, if you don’t have a DHCP server to provide IP addresses to the switch, use the switch’s
default IP address: 192.168.1.1.