109
Management
Bootup Files Tab Field Descriptions
You must have a TFTP server running on any host that you are uploading or downloading files
to/from. When you specify the file path, the path must be relative to the default path set in your TFTP
server software.
Configure the following parameters:
Message of the Day (MOTD) Tab Field Descriptions
You must have a TFTP server running on any host that you are uploading or downloading files
to/from when using TFTP. When you specify the file path, the path must be relative to the default
path set in your TFTP server software. You can download a MOTD file to the Terminal Server in the
DeviceManager by selecting
Tools
,
Advanced
,
Custom Files
and then selecting the
Download
Other File
option and browse to the MOTD file. In WebManager, select
Administration
,
Custom
Files
and select the
Other File
option and browse to the MOTD file. After the MOTD is downloaded
to the Terminal Server, you must specify the MOTD file name in the
Filename
field to access it as
the message of the day (no
TFTP Host
parameter is required when the file is internal).
Bypass Login
Password
When set, authorized users who do not have a password set, with the exception
of the Admin user, WILL NOT be prompted for a password at login with
Local
Authentication
.
Default:
Disabled
Password Retry
Limit
The number of attempts a user is allowed to enter a password for a serial port
connection from the network. If this limit is exceeded, the serial port is
disabled for 5 minutes. A user with Admin level rights can restart the serial
port, bypassing the timeout, by issuing a kill on the disabled serial port.
Default:
3
Firmware Host
The host name or IP address of the server that contains the firmware file. If you
use a host name, it must exist in the Terminal Server’s host table or be resolved
by DNS.
Firmware File
The path and file name, relative to the default path of your TFTP server
software, of the update software for the Terminal Server that will be loaded
when the Terminal Server is rebooted.
Configuration Host
The host name or IP address of the server that contains the configuration file. If
you use a host name, it must exist in the Terminal Server’s host table or be
resolved by DNS.
Configuration File
The path and file name, relative to the default path of your TFTP server
software, of the configuration file for the Terminal Server that will be loaded
when the Terminal Server is rebooted.
