_____________________________________________________________________
724-746-5500 | b lackb o x.co m
Page 123
Enter a
Name
and optionally a
Description
for the EMD and select the pre-configured serial
port that the EMD will be
Connected Via.
You may optionally calibrate the EMD with a Temperature Offset (+ or -
°
C) or Humidity Offset
(+ or percent).
Provide
Labels
for each of the two alarms (if used).
Check
Log Status
and specify the
Log Rate
(minutes between samples) if you want to log the
status from this EMD. These logs can be views from the
Status: Environmental Status
screen.
Click
Apply
. This will also create a new Managed Device (with the same name).
8.3.2 Environmental alerts
You can now set temperature, humidity and probe status alerts using
Alerts & Logging: Alerts
(refer to
Chapter 7
).
8.3.3 Environmental status
You can monitor the current status of all EMDs and their probes.
Select the
Status: Environmental Status
menu and a table with the summary status of all
connected EMD hardware will be displayed.
Click on
View Log
or select the
Environmental Logs
menu and you will be presented with a table
and graphical plot of the selected EMD’s log history.
