Chapter 3 : Operations
724-746-5500 l www.blackbox.com
52
Transmitter Network Settings
The administrator can click the
Network
button to cause the Transmitter Network Settings window
to be displayed as shown in Figure 24. This example figure has no active IP address defined. If
previously defined, it is maintained when bringing up this window.
Optionally the administrator can choose to target a different transmitter by entering a new
Transmitter IP Address and clicking the
Apply
button.
To change the IP address settings for a Transmitter at the active IP address, the administrator can
enter the new IP address, subnet mask, and gateway and then click on the
Apply
button. This may
cause the Transmitter to power-cycle itself. During this time, the transmitter will not respond for
almost a minute.
Figure 24 - Transmitter Network Settings Window
