724-746-5500 l www.blackbox.com
28
C H A P T E R
3
Chapter 3 - Operations
Overview
Operating a workstation or virtual desktop through the InvisaPC system is no different
than working directly connected to a PC desktop. All peripherals operate as if directly
connected, even though the workstation/virtual desktop is located at a distance.
While the InvisaPC system default settings will work in most environments, you may
configure the settings to better fit your installation via the On-Screen Display (OSD) on
an InvisaPC Receiver. You can also upgrade the InvisaPC system. See
Upgrading your
InvisaPC System
on page 45 for more information.
LED identification
Front panel
There is one LED on the front panel of an InvisaPC unit – integrated into the power-
button on the Receiver - called the
STATUS LED
. The STATUS LED will light up
when the unit (Receiver or Transmitter) is turned on. The
STATUS LED “blinks”
when
a unit is being upgraded.
Rear panel
Two LEDs are built into the RJ-45 connectors on the InvisaPC Receiver and Transmitter.
The definition of the operation of these LEDs is shown in table 3.1.
