Chapter 3 : Operations
724-746-5500 l www.blackbox.com
40
Figure 14 - New User Window
When adding a new user, the following fields are applied:
∞
User Name:
This is a unique name that uses 1–32 characters. The username can be any valid
username for a Microsoft O/S. This means the username cannot contain “ ”/ \ [ ] : ; | = , + *
? < > `’
∞
Password:
This field can be a minimum of 0 characters (i.e. blank) and a maximum of 32
characters. The username can be any valid username for a Microsoft O/S. This means the
username cannot contain “ ”/ \ [ ] : ; | = , + * ? < > `’
∞
Confirm Password:
This field must match the Password field. If there is a mismatch, a
message is presented to the user in a pop-up screen.
∞
Privilege:
This field, which is a drop-down list, defines the type of user the new user will be
–
Administrator
,
Power-User,
or
User
.
∞
Selected Connections:
The new user must be allocated Connections that he/she can access.
These are selected from the Available Connections window by the user selecting a set of
connections (click on the connection in the Available Connection window and then click
the “Add” button). This causes the selected connections to be “added” to a user’s selected
connection window.
∞
Connect to at login:
This tick box defines whether the InvisaPC Receiver attempts to
connect immediately to the selected connection after a logon by the user. This automatic
connection only occurs after a logon. If a user exits the connection, the connection tab is
displayed to the user for selection of a connection.
