Chapte
r 2: Installation
724-746-5500 l www.blackbox.com
23
To connect the InvisaPC Receiver:
1.
Connect your keyboard, monitor, mouse, and other peripheral cables to the
appropriately labeled ports on the the InvisaPC Receiver.
2.
Connect the UTP cable to the RJ-45 port on the back of the InvisaPC Receiver.
3.
Turn on the InvisaPC Receiver. A default connection is available to allow connection
to a default InvisaPC Transmitter. You can use the OSD to add a different connection
to a remote Transmitter or virtual desktop (see page 35 for details on how to add a
connection). The default Transmitter IP address is 192.168.1.22.
4.
Once a Connection has been defined, use the OSD to make connection.
NOTE:
VGA monitors can be connected to the InvisaPC Receiver by using a DVI-D to VGA converter (not
adaptor), such as the AC1038A.
