35
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 8: OSD FUNCTIONS
8.7.2 AUTO LOG ON
When the Log-on button is selected and a user is chosen, this user will be automatically logged on after power is applied to unit or
after a reboot.
NOTE: Default_TX
is 192.168.1.22
FIGURE 8-18. NEW USER WINDOW
When adding a new user, the following fields are used to define the user:
User Name: This is a unique name that uses 1–32 characters. The username can be any valid username for a Microsoft O/S.
This means the username cannot contain “ ”/ \ [ ] : ; | = , + * ? < > `’.
Password: This field can be a minimum of 0 characters (i.e. blank) and a maximum of 32 characters. The password can be any valid
password for a Microsoft O/S. This means the password cannot contain “ ”/ \ [ ] : ; | = , + * ? < > `’
Confirm Password: This field must match the Password field. If there is a mismatch, a message is presented to the user in a
pop-up screen.
Privilege: This field, which is a drop-down list, defines the type of user the new user will be—Administrator or User.
Selected Connections: The new user must be allocated Connections that he/she can access. These are selected from the Available
Connections window by the user selecting a set of connections (click on the connection in the Available Connection window and
then click the “Add” button). This causes the selected connections to be “added” to a user’s selected connection window.
Connect to at login: This tick box defines whether the Emerald Receiver or Boxilla attempts to connect immediately to the selected
connection after a logon by the user. This automatic connection only occurs after a logon. If a user exits the
connection, the connection tab is displayed to the user for selection of a connection. This Connect to at Login is only saved when
the Save button is clicked. If not clicked and another tab is selected, the changes are ignored. If not ticked, no automatic connection
is made on log-in.
Once the new user fields have been filled out, the Save button must be clicked to create the new user. Clicking the Save button
causes the validation of the new username checking that it is unique and that the two password entries match. If this validation
fails, a pop-up window displays the reason for the failure – and the new user is not created. After dismissing the pop-up window,
the user can fix the error and click Save again.
The Cancel button should be clicked if the new user is not to be created.
