20
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 8: OSD FUNCTIONS
8.3 DEFAULT USERNAME AND PASSWORD
The Emerald Receiver ships with a default username of admin with a blank password (i.e. no password). This user cannot be
deleted, but the password can be changed.
NOTE: If you create a password for the default Admin account and forget it, there is no way to reset/retrieve it unless using a
Boxilla. We recommend that the administrator creates a second Admin account for critical systems in case the main Admin
account is locked out.
8.4 USER VIEWS AND CAPABILITIES
There are three different types of users in the Emerald System. Your user type will determine what exactly you will see on your OSD.
For the purpose of this Manual, we show the screen of an Administrator. This means that some buttons shown here may not be
available to other users.
The Emerald comes as an unmanaged system and as a managed system. There are some differences in the OSD for these
systems that you may see here.
8.5 CONNECTIONS SCREEN
When a user successfully logs on to the Emerald Receiver, the Connection screen is displayed. This is shown in
Figure 8-2. The connections that a user can make are listed in the connection window. The user logged on is shown
in the top right corner of the OSD.
NOTE: Default_TX
is 192.168.1.22
FIGURE 8-2. CONNECTION SCREEN
If the user is an Administrator type, the three buttons on the left (New, Edit, and Remove) will be displayed. These allow the user
to create, edit, or remove connections. For Standard User types, no connections can be created, edited, or removed, so these
buttons are not displayed or are greyed out.
