®
®
724
-74
6-5
500
®
OU
T
OU
T
OU
T
OU
T
OU
T
IN
LIN
K5
LIN
K6
LIN
K7
LIN
K8
LIN
K1
POW
ER
LIN
K2
LIN
K3
LIN
K4
TR
AN
SM
ITT
ER
Wiz
ard
Mul
time
dia
Exte
nde
r
Plus
To connect the source computer serial port
Note: The serial port feature supports RS232 serial devices at speeds up to
19200 baud and all hardware handshake lines are available (AVU6001A,
AVU6011A and AVU6111A only). No extra error checking on the serial port
signals is applied.
1 Attach the male connector of the supplied serial link cable to the socket
labelled
on the AVU6001A transmitter or
IN
on the AVU6004A/
AVU6008A transmitters.
2 Attach the other end (female connector) of the serial cable to the
appropriate RS232 serial socket on the source PC system.
®
724
-74
6-55
00
®
IN
OU
T
IN
OU
T
LINK
POW
ER
TRA
NSM
ITT
ER
Wiza
rd
Multi
media
Exte
nder
Plus
Connecting the source computer
serial port to the AVU6004A or
AVU6008A transmitter
Connecting the source computer
serial port to the AVU600A
transmitter
Important
• It is essential that the source PC, all
AVU2004A/AVU2008A modules and all
connected displays are configured to use
the same serial communication settings
(see
Switch.settings
for details). The
AVU6001A, AVU6011A and AVU6111A
modules all auto-sense the serial
configuration and do not need to be set.
• When switches SW2 to SW10 are all
OFF, the AV module is set to expect the
following serial port configuration: 19200
baud, 8-bit data byte, 1 stop bit, no parity
checking, software handshake.
• Remember to set the switches
before
power is applied to the unit.
