manualshive.com logo in svg

Black Box ASD-4, Руководство пользователя, Страница: 40 / 84

Поделиться
Скачать
Black Box ASD-4 Скачать руководство пользователя страница 40

33

CHAPTER 4: Operation 

1-burst ring, transfers to the TAD and PHONE ports:

STANDARD RING

2-burst ring, transfers to the FAX port:

RING            RING

3-burst ring, transfers to the MODEM port:

SHORT, SHORT, LONG

OR

SHORT, LONG, SHORT

The ASD-4 allows you to select the port assignment for each of these ring
patterns (see 

Section 5.4.4

through 

5.4.6

). Once you connect your telephone

equipment to the ASD-4, you can get different phone numbers for the
individual devices to allow automatic access to each device.

NOTE

The name of this “Distinctive Ring Service,” as well as the ring patterns
available, may vary with each telephone company. This service might not
be available in some locations, but it is required in order for the ASD-4 to
route calls by ring pattern. Contact your local telephone company to
verify the availability of this service in your area.

NOTE

If Distinctive Ring calls are being misdirected by the ASD-4, set function
[4][0] (Rings to Answer Call) to answer on two rings (see 

Section 5.4.7

).

4.4  Using Remote Message Notification (RMN)

When you enable Remote Message Notification, the ASD-4 can automatically
notify a user that he or she has received a voice message, fax, or data
transmission by dialing a telephone number when it receives a call to the TAD
port, FAX port, MODEM port, or any combination of these ports.

After an incoming call is complete, the ASD-4 dials the user-programmed

RMN phone number and begins producing a series of beeps (see below).
These beeps tell whoever answers the phone at the other end which port or
ports received the incoming call. You can turn RMN ON or OFF, enter or
change the RMN phone number, and set the RMN-triggering conditions, and
you can do all these things “on location” or remotely:

Содержание ASD-4





















































































Отзывы:

Нет отзывов