Black Box ASD-4 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 84

Black Box ASD-4 Скачать руководство пользователя страница 15

8

ASD-4

NOTE

Do not place the ASD-4 on, or in close proximity to, peripheral equipment.

NOTE

To make full use of the ASD-4’s automatic switching abilities, you must
connect your equipment to the proper ports, as explained below, and you
must set your equipment to answer on one or two rings.

To connect your telephone equipment to the ASD-4, follow these steps:

1. If you haven’t done so already, connect the phone by plugging its phone

cable into the ASD-4’s PHONE port.

2. To connect a TAD, first plugging a phone cable into the TAD’s phone-

line jack. (This jack will probably be labeled “Line,” “Telephone Line,” or
something similar.) Then plug the other end of the cable into the ASD-4’s
TAD port.

NOTE

The ASD-4 has an Automatic TAD Transfer feature associated with the
TAD port (see

Section 5.3.4

). The ASD-4 has this feature factory-preset

OFF.

3. To connect a fax machine or a fax/modem card, first plug one end of a

phone cable into the appropriate jack on the fax or fax/modem. (Like
the TAD’s, this jack will probably be labeled “Line,” “Telephone Line,” or
something similar.) Then plug the other end of the cable into the ASD-4’s
FAX port.

4. To connect a telephone device such as a regular modem, plug one end of

a phone cable into the the “incoming phone line” jack on the telephone
device. (Check the device’s manual to make sure you use the right jack
and that you connect the cable properly.) Then plug the other end of this
cable into the ASD-4’s MODEM port.

«
...
13
14
15
16
17
...
»

Содержание ASD-4





















































































Отзывы:

Нет отзывов