wel
c
ome
c
ontent
s
inst
all
ation
op
era
tion
r
t
er
in
orma
tion
®
Connections at the remote module
1 Place the remote module adjacent to the user location.
3 Attach the leads of up to four
USB devices (two of which are
usually a keyboard and mouse)
to the sockets located adjacent
to the video output connector.
To video
monitor
4 [Dual VGA variant only] Optionally
attach a serial device lead to the
male serial connector on the
remote module.
A
B
REMO
TE
®
BLA
CK
BOX
REMO
TE
®
2 Attach the lead from the video
monitor to the video out socket
on the remote module.
[Dual VGA variant only]
Optionally attach the lead from
a second video monitor to the
upper video out socket on the
remote module.
To secondary
video monitor
BLA
CK
BOX
REMO
TE
®
A
B
REMO
TE
®
To USB devices,
e.g. keyboard,
mouse, etc.
To RS
serial device
See the Important note on page 5
[MS2 variant only] Note: When connecting four USB devices to the unit,
ensure that their total power requirements do not exceed 1700mA (1.7A).
The USB standard states a maximum allowable current draw of 500mA
(0.5A) per device, although most devices remain well below this limit - USB
keyboards and mice typically require 100mA. Each X50 contains a self-
resetting fuse that will prevent damage by shutting down the unit if the
total power draw becomes excessive.
