Chapter 3 : STARTING Multi-Input Video Scaler
PAGE 10
3-5.
COMPONENT VIDEO INPUT (Interlaced YUV)
The Component Video signal, also called YUV (Y, R-Y, B-Y), or BETACAM
™
, is widely used in broadcasting and is
available on high-quality DVD players. The COMPONENT signal is transmitted on 3 coaxial cables, and also has a better
quality picture than COMPOSITE and S.VIDEO signals. The COMPONENT connectors are usually RCA (x3), or BNC
(x3) connectors.
CONNECTION
3-6.
COMPUTER INPUT
This input is used to pass-through any High-Definition or Computer signals. The signal connected to this input is sent
directly to the display output. Also you may connect a Computer source (PC, MAC, WORKSTATION), or a high
definition source (progressive DVD player, HDTV). Use the VGA supplied cable (HD15 male/male) to connect a PC. For
the others sources you may need some adapters (not supplied).
3-7.
DISPLAY OUTPUT
The
Multi-Input Video Scaler
is equipped with an HD 15 female output connector. If your display device is equipped
only with 5 BNC input connectors: use an HD 15 to BNC (x5) cable (please see connection schematic below).
The
Multi-Input Video Scaler
provides an RGBHV (H & V Separate Sync.) signal.
CONNECTION
