Black & Decker HD555, Инструкция по эксплуатации

Страница: 9 / 12

简体中文
●
9
用途
警告！ 请让工具在自有速度下工作。请勿过载。
警告！ 在墙上、地板或天花板上钻孔之前，请检
查电线和管道位置。
选择旋转方向（图
E
）
如果要钻孔和转紧螺丝，请使用向前（顺时针）旋
转。如果要转松螺丝或取出卡住的钻头，使用向后
（逆时针）旋转。
►
如果要选择向前旋转，将正 / 反转滑块 (
3
) 拨
到中心位置。
►
要选择向后旋转，将正 / 反转滑块拨到左边。
警告！ 在马达运行时切勿更改旋转方向。
选择钻孔模式
►
在砖石上钻孔时，将钻孔模式选择器 (
3
) 设置
到
ENGLISH
•
5 ENGLISH • 5
USE
Warning! Let the tool work at its own pace. Do not
overload.
Warning! Before drilling into walls, floors or ceilings,
check for the location of wiring and pipes.
Selecting the direction of rotation (Fig. E)
For drilling and for tightening screws, use forward
(clockwise) rotation. For loosening screws or removing a
jammed drill bit, use reverse (counterclockwise) rotation.
f
To select forward rotation, push the forward/reverse
slider (3) to the centre position.
f
To select reverse rotation, push the forward/reverse
slider to the left.
Warning! Never change the direction of rotation while
the motor is running.
Selecting the drilling mode
f
For drilling in masonry, set the drilling mode selector
(3) to the position.
f
For drilling in other materials and for screwdriving, set
the drilling mode selector to the position.
Setting the drilling depth (Fig. F)
f
Slacken the side handle (7) by turning the grip
counterclockwise.
f
Set the depth stop (6) to the desired position. The
maximum drilling depth is equal to the distance
between the tip of the drill bit and the front end of the
depth stop.
f
Tighten the side handle by turning the grip clockwise.
Switching on and off
f
To switch the tool on, press the speed switch (1).
For tools with variable speed switch, the tool speed
depends on how far you press the switch. As a
general rule, use low speeds for large diameter
drill bits and high speeds for smaller diameter drill bits.
f
For continuous operation, press the lock-on button (2)
and release the speed switch. This option is available
only at full speed. This option does not work in reverse
rotation. Reverse rotation available only for HD500.
f
To switch the tool off, release the speed switch.
To switch the tool off when in continuous operation,
press the speed switch once more and release it.
MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low-pressure air supply. Excessive build-up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your product
are available from your local dealer or authorized service
center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the BLACK+DECKER
location nearest to you.
NOTE
f
BLACK+DECKER’s policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
f
Standard equipment and accessories may vary by
country.
f
Product specifications may differ by country.
f
Complete product range may not be available in all
countries. Contact your local BLACK+DECKER
dealers for range availability.
位置。
►
在其他材料上钻孔以及执行螺旋操作时，将钻
孔模式选择器设置到
ENGLISH
•
5 ENGLISH • 5
USE
Warning! Let the tool work at its own pace. Do not
overload.
Warning! Before drilling into walls, floors or ceilings,
check for the location of wiring and pipes.
Selecting the direction of rotation (Fig. E)
For drilling and for tightening screws, use forward
(clockwise) rotation. For loosening screws or removing a
jammed drill bit, use reverse (counterclockwise) rotation.
f
To select forward rotation, push the forward/reverse
slider (3) to the centre position.
f
To select reverse rotation, push the forward/reverse
slider to the left.
Warning! Never change the direction of rotation while
the motor is running.
Selecting the drilling mode
f
For drilling in masonry, set the drilling mode selector
(3) to the position.
f
For drilling in other materials and for screwdriving, set
the drilling mode selector to the position.
Setting the drilling depth (Fig. F)
f
Slacken the side handle (7) by turning the grip
counterclockwise.
f
Set the depth stop (6) to the desired position. The
maximum drilling depth is equal to the distance
between the tip of the drill bit and the front end of the
depth stop.
f
Tighten the side handle by turning the grip clockwise.
Switching on and off
f
To switch the tool on, press the speed switch (1).
For tools with variable speed switch, the tool speed
depends on how far you press the switch. As a
general rule, use low speeds for large diameter
drill bits and high speeds for smaller diameter drill bits.
f
For continuous operation, press the lock-on button (2)
and release the speed switch. This option is available
only at full speed. This option does not work in reverse
rotation. Reverse rotation available only for HD500.
f
To switch the tool off, release the speed switch.
To switch the tool off when in continuous operation,
press the speed switch once more and release it.
MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low-pressure air supply. Excessive build-up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your product
are available from your local dealer or authorized service
center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the BLACK+DECKER
location nearest to you.
NOTE
f
BLACK+DECKER’s policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
f
Standard equipment and accessories may vary by
country.
f
Product specifications may differ by country.
f
Complete product range may not be available in all
countries. Contact your local BLACK+DECKER
dealers for range availability.
位置。
设置钻孔深度（图
F
）
►
通过逆时针转动手柄转松侧手柄 (
7
)。
►
将深度尺 (
6
) 设置到所需位置。最大钻孔深度
相等于钻头尖端与深度尺前末端之间的距离。
►
通过顺时针转动手柄转紧侧手柄。
开启和关闭
►
要打开工具电源，请按下速度开关 (
1
)。对于
采用变速开关的工具，工具速度取决于按下开
关的程度。按照常规，使用大直径钻头时采用
低速，使用小直径钻头时则采用高速。
►
要使工具连续运行，按下锁定按钮 (
2
) 然后松
开速度开关。此选项只在全速运作时可用。
►
若要关闭工具，请松开速度开关。要在持续操
作时关闭工具电源，请再次按下速度开关然后
放开。
维护
请尽量避免粉尘和碎屑在通风口和电机外壳上积
聚。使用干净的抹布拭擦，并使用低压气源吹走粉
尘和碎屑。过多的金属屑堆积可能会导致电流从内
部件传导至暴露的金属部件。
重要！ 为了确保产品 安全 及 可靠 ，所有的维修、
保养和调节，除了本手册中列出的以外，均应该由
授权的服务中心或合格的维修服务人员执行，并始
终使用相同的备件。
ENGLISH
•
5 ENGLISH • 5
USE
Warning! Let the tool work at its own pace. Do not
overload.
Warning! Before drilling into walls, floors or ceilings,
check for the location of wiring and pipes.
Selecting the direction of rotation (Fig. E)
For drilling and for tightening screws, use forward
(clockwise) rotation. For loosening screws or removing a
jammed drill bit, use reverse (counterclockwise) rotation.
f
To select forward rotation, push the forward/reverse
slider (3) to the centre position.
f
To select reverse rotation, push the forward/reverse
slider to the left.
Warning! Never change the direction of rotation while
the motor is running.
Selecting the drilling mode
f
For drilling in masonry, set the drilling mode selector
(3) to the position.
f
For drilling in other materials and for screwdriving, set
the drilling mode selector to the position.
Setting the drilling depth (Fig. F)
f
Slacken the side handle (7) by turning the grip
counterclockwise.
f
Set the depth stop (6) to the desired position. The
maximum drilling depth is equal to the distance
between the tip of the drill bit and the front end of the
depth stop.
f
Tighten the side handle by turning the grip clockwise.
Switching on and off
f
To switch the tool on, press the speed switch (1).
For tools with variable speed switch, the tool speed
depends on how far you press the switch. As a
general rule, use low speeds for large diameter
drill bits and high speeds for smaller diameter drill bits.
f
For continuous operation, press the lock-on button (2)
and release the speed switch. This option is available
only at full speed. This option does not work in reverse
rotation. Reverse rotation available only for HD500.
f
To switch the tool off, release the speed switch.
To switch the tool off when in continuous operation,
press the speed switch once more and release it.
MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low-pressure air supply. Excessive build-up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your product
are available from your local dealer or authorized service
center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the BLACK+DECKER
location nearest to you.
NOTE
f
BLACK+DECKER’s policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
f
Standard equipment and accessories may vary by
country.
f
Product specifications may differ by country.
f
Complete product range may not be available in all
countries. Contact your local BLACK+DECKER
dealers for range availability.
ENGLISH
•
5
ENGLISH • 5
USE
Warning! Let the tool work at its own pace. Do not
overload.
Warning! Before drilling into walls, floors or ceilings,
check for the location of wiring and pipes.
Selecting the direction of rotation (Fig. E)
For drilling and for tightening screws, use forward
(clockwise) rotation. For loosening screws or removing a
jammed drill bit, use reverse (counterclockwise) rotation.
f
To select forward rotation, push the forward/reverse
slider (3) to the centre position.
f
To select reverse rotation, push the forward/reverse
slider to the left.
Warning! Never change the direction of rotation while
the motor is running.
Selecting the drilling mode
f
For drilling in masonry, set the drilling mode selector
(3) to the position.
f
For drilling in other materials and for screwdriving, set
the drilling mode selector to the position.
Setting the drilling depth (Fig. F)
f
Slacken the side handle (7) by turning the grip
counterclockwise.
f
Set the depth stop (6) to the desired position. The
maximum drilling depth is equal to the distance
between the tip of the drill bit and the front end of the
depth stop.
f
Tighten the side handle by turning the grip clockwise.
Switching on and off
f
To switch the tool on, press the speed switch (1).
For tools with variable speed switch, the tool speed
depends on how far you press the switch. As a
general rule, use low speeds for large diameter
drill bits and high speeds for smaller diameter drill bits.
f
For continuous operation, press the lock-on button (2)
and release the speed switch. This option is available
only at full speed. This option does not work in reverse
rotation. Reverse rotation available only for HD500.
f
To switch the tool off, release the speed switch.
To switch the tool off when in continuous operation,
press the speed switch once more and release it.
MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low-pressure air supply. Excessive build-up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your product
are available from your local dealer or authorized service
center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the BLACK+DECKER
location nearest to you.
NOTE
f
BLACK+DECKER’s policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
f
Standard equipment and accessories may vary by
country.
f
Product specifications may differ by country.
f
Complete product range may not be available in all
countries. Contact your local BLACK+DECKER
dealers for range availability.
ENGLISH
•
5 ENGLISH • 5
USE
Warning! Let the tool work at its own pace. Do not
overload.
Warning! Before drilling into walls, floors or ceilings,
check for the location of wiring and pipes.
Selecting the direction of rotation (Fig. E)
For drilling and for tightening screws, use forward
(clockwise) rotation. For loosening screws or removing a
jammed drill bit, use reverse (counterclockwise) rotation.
f
To select forward rotation, push the forward/reverse
slider (3) to the centre position.
f
To select reverse rotation, push the forward/reverse
slider to the left.
Warning! Never change the direction of rotation while
the motor is running.
Selecting the drilling mode
f
For drilling in masonry, set the drilling mode selector
(3) to the position.
f
For drilling in other materials and for screwdriving, set
the drilling mode selector to the position.
Setting the drilling depth (Fig. F)
f
Slacken the side handle (7) by turning the grip
counterclockwise.
f
Set the depth stop (6) to the desired position. The
maximum drilling depth is equal to the distance
between the tip of the drill bit and the front end of the
depth stop.
f
Tighten the side handle by turning the grip clockwise.
Switching on and off
f
To switch the tool on, press the speed switch (1).
For tools with variable speed switch, the tool speed
depends on how far you press the switch. As a
general rule, use low speeds for large diameter
drill bits and high speeds for smaller diameter drill bits.
f
For continuous operation, press the lock-on button (2)
and release the speed switch. This option is available
only at full speed. This option does not work in reverse
rotation. Reverse rotation available only for HD500.
f
To switch the tool off, release the speed switch.
To switch the tool off when in continuous operation,
press the speed switch once more and release it.
MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low-pressure air supply. Excessive build-up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your product
are available from your local dealer or authorized service
center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the BLACK+DECKER
location nearest to you.
NOTE
f
BLACK+DECKER’s policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
f
Standard equipment and accessories may vary by
country.
f
Product specifications may differ by country.
f
Complete product range may not be available in all
countries. Contact your local BLACK+DECKER
dealers for range availability.
ENGLISH
•
5 ENGLISH • 5
USE
Warning! Let the tool work at its own pace. Do not
overload.
Warning! Before drilling into walls, floors or ceilings,
check for the location of wiring and pipes.
Selecting the direction of rotation (Fig. E)
For drilling and for tightening screws, use forward
(clockwise) rotation. For loosening screws or removing a
jammed drill bit, use reverse (counterclockwise) rotation.
f
To select forward rotation, push the forward/reverse
slider (3) to the centre position.
f
To select reverse rotation, push the forward/reverse
slider to the left.
Warning! Never change the direction of rotation while
the motor is running.
Selecting the drilling mode
f
For drilling in masonry, set the drilling mode selector
(3) to the position.
f
For drilling in other materials and for screwdriving, set
the drilling mode selector to the position.
Setting the drilling depth (Fig. F)
f
Slacken the side handle (7) by turning the grip
counterclockwise.
f
Set the depth stop (6) to the desired position. The
maximum drilling depth is equal to the distance
between the tip of the drill bit and the front end of the
depth stop.
f
Tighten the side handle by turning the grip clockwise.
Switching on and off
f
To switch the tool on, press the speed switch (1).
For tools with variable speed switch, the tool speed
depends on how far you press the switch. As a
general rule, use low speeds for large diameter
drill bits and high speeds for smaller diameter drill bits.
f
For continuous operation, press the lock-on button (2)
and release the speed switch. This option is available
only at full speed. This option does not work in reverse
rotation. Reverse rotation available only for HD500.
f
To switch the tool off, release the speed switch.
To switch the tool off when in continuous operation,
press the speed switch once more and release it.
MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low-pressure air supply. Excessive build-up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your product
are available from your local dealer or authorized service
center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the BLACK+DECKER
location nearest to you.
NOTE
f
BLACK+DECKER’s policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
f
Standard equipment and accessories may vary by
country.
f
Product specifications may differ by country.
f
Complete product range may not be available in all
countries. Contact your local BLACK+DECKER
dealers for range availability.
附件
建议与您的产品配套使用的附件可从当地经销商处
或授权服务中心另行购买。
保护环境
分类回收。本产品不得与普通家庭垃圾
一起处理。
如果您发现您的
BLACK+DECKER
产品需
要进行替换，或您已经不再需要使用这
些产品，请勿将它们与家庭废物一起处
理。请将它们单独分类回收。
分类回收使用过的产品和包装能够让材
料得以再循环和再利用。
再生材料的再利用有助于防止环境污染，
并降低对原材料的需求。当地法规可能
要求由市政废物处理点或向您出售新产
品的零售商提供从家庭中分类回收电气
产品的服务。
服务信息
BLACK+DECKER
提供覆盖整个亚洲的公司隶属和授
权服务地点。所有的
BLACK+DECKER
服务中心都
具有训练有素的人员，为客户提供高效和可靠的产
品服务。
不论您是需要技术建议、维修或原厂替换部件，请
联系最靠近您的
BLACK+DECKER
地点。
注
► BLACK+DECKER
的政策是持续改进我们的产
品，因此，我们保留随时更改产品规格的权利，
恕不另行通知。
►
标准设备和附件可能会因为不同的国家（地
区）而有所不同。
►
产品规格可能会因为不同的国家 / 地区而有所
不同。
►
并非所有国家 / 地区均可提供完整的产品系
列。有关各产品系列的供货情况，请联系您当
地的
BLACK+DECKER
代理商。
制造商 ： 百得美国公司
地址 ：
701 E Joppa Rd, TW050 MD21286, Towson,
美国
制造地 ： 浙江武义
ENGLISH
•
5 ENGLISH • 5
USE
Warning! Let the tool work at its own pace. Do not
overload.
Warning! Before drilling into walls, floors or ceilings,
check for the location of wiring and pipes.
Selecting the direction of rotation (Fig. E)
For drilling and for tightening screws, use forward
(clockwise) rotation. For loosening screws or removing a
jammed drill bit, use reverse (counterclockwise) rotation.
f
To select forward rotation, push the forward/reverse
slider (3) to the centre position.
f
To select reverse rotation, push the forward/reverse
slider to the left.
Warning! Never change the direction of rotation while
the motor is running.
Selecting the drilling mode
f
For drilling in masonry, set the drilling mode selector
(3) to the position.
f
For drilling in other materials and for screwdriving, set
the drilling mode selector to the position.
Setting the drilling depth (Fig. F)
f
Slacken the side handle (7) by turning the grip
counterclockwise.
f
Set the depth stop (6) to the desired position. The
maximum drilling depth is equal to the distance
between the tip of the drill bit and the front end of the
depth stop.
f
Tighten the side handle by turning the grip clockwise.
Switching on and off
f
To switch the tool on, press the speed switch (1).
For tools with variable speed switch, the tool speed
depends on how far you press the switch. As a
general rule, use low speeds for large diameter
drill bits and high speeds for smaller diameter drill bits.
f
For continuous operation, press the lock-on button (2)
and release the speed switch. This option is available
only at full speed. This option does not work in reverse
rotation. Reverse rotation available only for HD500.
f
To switch the tool off, release the speed switch.
To switch the tool off when in continuous operation,
press the speed switch once more and release it.
MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low-pressure air supply. Excessive build-up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your product
are available from your local dealer or authorized service
center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the BLACK+DECKER
location nearest to you.
NOTE
f
BLACK+DECKER’s policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
f
Standard equipment and accessories may vary by
country.
f
Product specifications may differ by country.
f
Complete product range may not be available in all
countries. Contact your local BLACK+DECKER
dealers for range availability.
ENGLISH
•
5
ENGLISH • 5
USE
Warning! Let the tool work at its own pace. Do not
overload.
Warning! Before drilling into walls, floors or ceilings,
check for the location of wiring and pipes.
Selecting the direction of rotation (Fig. E)
For drilling and for tightening screws, use forward
(clockwise) rotation. For loosening screws or removing a
jammed drill bit, use reverse (counterclockwise) rotation.
f
To select forward rotation, push the forward/reverse
slider (3) to the centre position.
f
To select reverse rotation, push the forward/reverse
slider to the left.
Warning! Never change the direction of rotation while
the motor is running.
Selecting the drilling mode
f
For drilling in masonry, set the drilling mode selector
(3) to the position.
f
For drilling in other materials and for screwdriving, set
the drilling mode selector to the position.
Setting the drilling depth (Fig. F)
f
Slacken the side handle (7) by turning the grip
counterclockwise.
f
Set the depth stop (6) to the desired position. The
maximum drilling depth is equal to the distance
between the tip of the drill bit and the front end of the
depth stop.
f
Tighten the side handle by turning the grip clockwise.
Switching on and off
f
To switch the tool on, press the speed switch (1).
For tools with variable speed switch, the tool speed
depends on how far you press the switch. As a
general rule, use low speeds for large diameter
drill bits and high speeds for smaller diameter drill bits.
f
For continuous operation, press the lock-on button (2)
and release the speed switch. This option is available
only at full speed. This option does not work in reverse
rotation. Reverse rotation available only for HD500.
f
To switch the tool off, release the speed switch.
To switch the tool off when in continuous operation,
press the speed switch once more and release it.
MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low-pressure air supply. Excessive build-up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your product
are available from your local dealer or authorized service
center.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the BLACK+DECKER
location nearest to you.
NOTE
f
BLACK+DECKER’s policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
f
Standard equipment and accessories may vary by
country.
f
Product specifications may differ by country.
f
Complete product range may not be available in all
countries. Contact your local BLACK+DECKER
dealers for range availability.