Black & Decker CD18QC, Инструкция по эксплуатации

Страница: 8 / 8

8
ENGLISH
Drilling in Masonry
Use carbide tipped masonry bits. Refer to Drilling section.
Keep even force on the drill but not so much that you crack
the brittle material. Asmooth, even flow of dust indicates the
proper drilling rate.
MAINTENANCE
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
• Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Never let any liquid get inside the tool and never
immerse any part of the tool into liquid.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be disposed
of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-use of
recycled materials helps prevent environmental pollution and
reduces the demand for raw materials.
NOTE
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf. You can
check the location of your nearest authorised repair agent
by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at
www.blackanddecker.com.
GUARANTEE
Four-Year Home Use Warranty
Black & Decker will repair, without charge, any defects due
to faulty materials or workmanship for three years from the
date of purchase. Please return the complete unit,
transportation prepaid, to any Black & Decker Service
Centre, or any authorised service station.
For warranty repair information, call (Australia) 1800 654
155 or (New Zealand) 0800 339 258. This warranty does
not apply to:
• Accessories
• Damage caused where repairs have been made or
attempted by others.
• Damage due to misuse, neglect, wear and tear,
alteration or modification.
This warranty gives you specific legal rights and you
mayhave other rights under the provisions of the Consumer
Guarantee Act 1993 (New Zealand only), Trade Practices Act
1974 and State Legislation (Australia only).In addition to the
warranty, Black & Decker tools are covered by our:
Free One Year Service Contract
Black & Decker will also maintain the tool for free at any
time during the first year of purchase. This includes labour,
parts and lubrication required to restore the product to
sound mechanical and/or electrical condition. Normal wear
parts are not covered in this service. Carbon brushes worn
more than 50% will be replaced.
NOTE: 4-Year warranty is not applicable to items deemed
as consumables. Black & Decker Reserves the right to
review its warranty policy prior to launch of any new
business development products.
Contact Information
Australia
Black & Decker Tel. 03-8720 5100
20 Fletcher Road, Mooroolbark, Fax. 03-9727 5940
Victoria, 3138
New Zealand
Black & Decker Tel. 0800 339 258
5 Te Apunga Place Fax. 09 259 1122
Mt Wellington
Auckland 1060
Contact your local council for disposal information.
90554603