ENGLISH • 17
Replacing the drive belt (Fig. H)
f
Loosen the screws (20) and remove the cover (21).
f
Remove the old drive belt.
f
Place the new belt (22) over the pulleys. Place the belt
over the large pulley (23) first, then over the small
pulley (24), while manually rotating the belt steadily.
f
Put the cover back in place and tighten the screws.
MAINTENANCE
Keep guards, air vents and the motor housing as clear as
possible of dust and dirt. Wipe with a clean cloth and blow
through with a low-pressure air supply. Excessive build-up
of metal dust can cause tracking of electrical current from
the internal parts to exposed metal parts.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
The performance of your tool depends on the accessory
used. BLACK+DECKER and Piranha accessories
are engineered to high quality standards and designed
to enhance the performance of your tool. By using these
accessories you will get the very best from your tool.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to
provide customers with efficient and reliable power tool
service. For more information about our authorized service
centers and if you need technical advice, repair, or genuine
factory replacement parts, contact the BLACK+DECKER
location nearest you, or visit us at
www.BlackandDecker-la.com
SPECIFICATIONS
7698
Voltage
AR
220V ~ 50Hz
B2C
220V ~ 50-60Hz
B3
120V ~ 60Hz
B2
220V ~ 60Hz
BR
127V ~ 60Hz
Power 650W
No-load speed
16500/min (rpm)
