BK Radio DMH 5992 Скачать руководство пользователя страница 4

Страница: 4 / 34

DMH Owner’s Manual

RF ENERGY EXPOSURE AWARENESS AND CONTROL

INFORMATION, AND OPERATIONAL INSTRUCTIONS FOR FCC

OCCUPATIONAL USE REQUIREMENTS

BEFORE USING YOUR MOBILE 2-WAY RADIO, READ THE

INFORMATION BELOW WHICH CONTAINS IMPORTANT OPERATING

INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS

AND CONTROL INFORMATION FOR COMPLIANCE WITH RF

ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND

INTERNATIONAL STANDARDS.

NOTICE: This radio is intended for use in occupational/controlled

conditions, where users have full knowledge of their exposure and can

exercise control over their exposure to meet FCC limits. This radio device

is NOT authorized for general population, consumer, or any other use.

This 2-way radio uses electromagnetic energy in the radio frequency (RF)

spectrum to provide communications between two or more users over a

distance. It uses radio frequency (RF) energy or radio waves to send and

receive calls. RF energy is one form of electromagnetic energy; other forms

include, but are not limited to, sunlight and x-rays. RF energy, however,

should not be confused with these other forms of electromagnetic energy,

which when used improperly, can cause biological damage. Very high

levels of x-rays, for example, can damage tissues and genetic material.

Experts in science, engineering, medicine, health and industry work

with organizations to develop standards for exposure to RF energy.

These standards provide recommended levels of RF exposure for both

workers and the general public. These recommended RF exposure

levels include substantial margins of protection. All 2-way radios are

designed, manufactured, and tested to ensure they meet government

established RF exposure levels. In addition, manufacturers also

recommend specific operating instructions to users of 2-way radios.

These instructions are important because they inform users

about RF energy exposure and provide simple procedures on

how to control it. Please refer to the following websites for more

information on what RF energy exposure is and how to control your

exposure to assure compliance with established RF exposure limits.

http://www.fcc.gov/oet/rfsafety/rf-faqs.html

http://www.osha.gov/SLTC/radiofrequencyradiation/index.html

Содержание DMH 5992



































Результаты поиска

Содержание DMH 5992

Отзывы:

Похожие инструкции для DMH 5992

Бренды по названию

Популярные бренды

BK Radio DMH 5992, Руководство пользователя

Результаты поиска

Содержание DMH 5992

Отзывы:

Похожие инструкции для DMH 5992

Бренды по названию

Популярные бренды