24
RELM/BK Radio
[PRI] key repeatedly until you return to the start and reach
that character again.
b. Press the
[FCN]
key to shift the display left by one position,
leaving position 8 blank.
c. Press the
[PRI]
key repeatedly to enter the next character, or
press the
[FCN]
key a second time to enter a blank space.
d. To abandon changes, press the
[CLR]
key, restoring the
original label.
e. Press the
[ENT]
key to store changes.
PROGRAMMING A NUMERIC ID
Press
[ENT]
to display the numeric ID. Press
[CLR]
, then enter the new
ID (up to 7 digits). Press
[ENT]
to store the new ID. Select a new ID to
be programmed, or press and hold
[ENT]
to exit Programming Mode
(the
PRG
annunciator will be extinguished).
EMERGENCY CALL
Note: Emergency operation only applies to channels programmed
for Digital or Mixed Mode transmissions. If the channel is
programmed for Mixed Mode transmissions, the ‘TX Digital’ switch
must be ON.
To place an emergency group call, press and hold the emergency button
until the radio beeps and the display flashes. On some models, the
emergency button may be the microphone’s
[PRI]
key. All scanning
and priority scanning functions will be disabled. If the radio is in Unit-
To-Unit Mode, that mode will be exited and the radio will be placed in
Emergency Mode. Each subsequent press of PTT will cause the radio
to transmit on the knob-selected channel with the emergency bit set,
indicating an emergency condition. If the Channel Selector is changed,
the Emergency Mode will follow to the newly selected channel. Cycle
power to return the radio to normal operation.
On channels programmed for analog transmissions, and channels
programmed for Mixed Mode transmissions with the ‘TX Digital’ switch
OFF, pressing PTT in Emergency Mode will result in a normal analog
transmission.
