BK Radio DMH 5992 Скачать руководство пользователя страница 28

Страница: 28 / 34

DMH Owner’s Manual

If DTMF and ANI are both enabled, the ANI tone sequence is transmitted

only after the LAA0290 microphone’s

[ENT]

key is pressed while the

PTT

switch is activated. You will hear a sidetone.

TIME-OUT TIMER

The transmit Time-Out Timer limits the duration of calls and guards

against accidentally locking on the transmitter and tying up the radio

system. Your dealer can program the duration of the Time-Out Timer

(15-225 seconds, or disabled).

BUSY CHANNEL

If the radio has been programmed for Busy Channel operation, it will

operate in one of the following three Modes:

•  Busy Channel Indication
•  Busy Channel Lockout
•  Busy Channel Lockout with Override

BUSY CHANNEL INDICATION

The yellow Busy Channel Indicator glows if there is carrier activity on the

selected channel. If the selected channel is a Channel Guard channel

and the proper Channel Guard value is not detected, the Busy Channel

Indicator remains on for the duration of the carrier activity and no

message is heard. During Scan and Priority Scan operation, the Busy

Channel Indicator glows when activity is detected on any channel on the

Scan List.
When scanning or priority scanning Channel Guard channels with

the

[CG]

(Channel Guard Disable) button OFF and activity has been

detected, the Busy Channel Indicator glows for the time period necessary

to determine if the proper Channel Guard value has been received. This

will cause the Busy Channel Indicator to flash at various rates.

BUSY CHANNEL LOCkOUT

The Busy Channel Lockout feature applies only to those channels

programmed with a receive Channel Guard value. When carrier activity is

detected on the channel selected, the radio checks the receive Channel

Guard value. If the proper Channel Guard value is present, the radio can

transmit on that channel even if the

[CG]

button is off.

Содержание DMH 5992



































Результаты поиска

Содержание DMH 5992

Отзывы:

Похожие инструкции для DMH 5992

Бренды по названию

Популярные бренды

BK Radio DMH 5992, Руководство пользователя

Результаты поиска

Содержание DMH 5992

Отзывы:

Похожие инструкции для DMH 5992

Бренды по названию

Популярные бренды