42
11.1.3
USBTMC
The USB port is USBTMC-compliant and can be used for remote communication and
control. There are no additional settings in the menu system for USB configuration. The
only requirement is that the USBTMC driver be installed. It is included when installing
VISA software on the computer.
11.1.4
GPIB
Each device is assigned a GPIB address from 1-30. To communicate via GPIB, connect a
GPIB cable to the GPIB interface on the back of the instrument and configure the
address.
11.1.5
LAN (Ethernet)
There are three ways to control the Instrument via LAN interface: Web server, Telnet
connection, and Socket connection.
11.1.6
Web server
There is an embedded web server GUI (Graphical User Interface) that can access the
Instrument via LAN interface using a web browser. Using a web browser from a
computer connected to the same local area network as the Instrument. The GUI
provides a simple way to set the voltage and current, and to monitor the output. To use
this function, follow the steps below:
Open up a web browser on the computer.
1.
Check the IP address of the Instrument through menu tree System →
Information.
2.
Enter the IP address of the Instrument in the URL bar of your browser with IP
www.
GlobalTestSupply
.com
Find Quality Products Online at:
