22
List operation pages
Press the List softkey, refer to List Parameter Table for settings details.
Figure 18 - List Mode first page
Refer to Table 6 – List Mode First Page. The first page parameters are common to all the
steps added under the second page parameters. This first page only needs to be
configured once for List 0. Use the arrow keys (
▲
▼
◄
►
) to move the cursor to the
wanted parameter of the List page. Then press the ENTER Key to change its value.
Configure all the parameters for the List mode first page.
Parameters
ExampleSettings
List
0
Infinity
OFF
Repeat
02
Base
Time
Sync Source
Phase
Phase (deg)
0.0
When all of the values for the First page have been configured, press List Config softkey
to move to the Second page. The Step No. will indicate “New” as the values have not
been stored in memory yet. Empty Step 100 and current Step 0 will be indicated in the
Table 7 - List Mode First Page
www.
GlobalTestSupply
.com
Find Quality Products Online at:
