38
10.8 TIMing:TSTart:LEVel
This command is used to set the trigger level for the start test.
Command Syntax
TIMing:TSTart:LEVel <Nrf+>
Parameters
Depends on the start trigger source, which is the setting of the
Timing:TSTart:SOURce
com-
mand.
Example
TIM:TST:LEV 1
Query Syntax
TIMing:TSTart:LEVel?
Query Response
<NR2>
10.9 TIMing:TEND:SOURce
This command sets the trigger source for ending the test.
Command Syntax
TIMing:TEND:SOURce <source>
Parameters
VOLT- CURR- EXT
Example
TIM:TEND:SOUR VOLT
Query Syntax
TIMing:TEND:SOURce?
Query Response
<source>
10.10 TIMing:TEND:EDGE
This command is used to set the trigger edge of the end test.
Command Syntax
TIMing:TEND:EDGE <edge>
Parameters
RISE- FALL
Example
TIM:TEND:EDGE RISE
Query Syntax
TIMing:TEND:EDGE?
Query Response
<edge>
10.11 TIMing:TEND:LEVel
This command sets the trigger level for ending the test.
Command Syntax
TIMing:TEND:LEVel <Nrf+>
Parameters
Depends on the end trigger source, which is the setting of the
Timing:TEND:SOURce
com-
mand.
Example
TIM:TEND:LEV 1
Query Syntax
TIMing:TEND:LEVel?
Returned Parameters <NR2>
