Bizerba SC II 100, Руководство по эксплуатации

Страница: 16 / 107

About the device Operating instructions SC II
16 / 107 61429850113 en-US
2.7.2 Wireless LAN device network
Wireless LAN is a wireless network solution, that enables electronic devices to be networked
together without wiring.
The rules on the respective general allocation of frequencies must be observed.
The following instructions must be absolutely observed!
– When wireless networks are deployed, (including those supplied
by Bizerba and those not supplied by Bizerba), the required
transmission power set and frequency channels at Federal state
level must be strictly observed.
– Only wireless hardware is permitted in wireless networks that has
been released for use by the manufacturer in the country in which
it is to be deployed.
– If third parties access the network or wireless network, or if the
network is combined with foreign hardware, Bizerba is not liable
for any damages that result.
2.8 Warranty
Installation, start-up and initial training are carried out by trained staff of the Bizerba sales of-
fices, customer service locations or by companies commissioned by Bizerba.
Bizerba is not responsible for damages caused by:
– non-observance of operating conditions and operating instructions.
– defective electrical installation by the customer.
– structural changes to the devices.
– removal of verification seals and safety stamp marks.
– incorrect programming and operation.
– natural wear and tear.
The warranty will lapse, if:
– defects/damages occur as a result of interventions by persons not authorized by Bizerba.
– any spare parts or operating material other than original Bizerba ones are used.
– any thermal ticket rolls and labels other than original Bizerba ones are used.
– Labels and thermal ticket rolls are used, which have not been manufactured to Bizerba
specification or approved by Bizerba.
If you reset or program devices, check the new setting with a test run and test printout. This
helps to avoid incorrect results.
Only trained staff may operate the devices.
Check that Bizerba products are handled correctly and repeat training if necessary.
Bizerba products undergo continuous further development and are subject to different coun-
try-specific regulations. Examples of pictures and graphics contained in these operating in-
structions may vary from the version which you received.