6
Configurator operation procedure
1
Connect the fuel gauge to a USB port of your computer using a
programmer. Run the Configurator. Select the port name from the
drop down list in the cell "COM port"
2
If the COM port in absent in the list, use the "update" button
3
Press the button for connecting to the COM port
If the configurator is connected successfully to the COM port, the
connection button looks like
, and "Gauge is connected"
text will appear in the status line.
When the link is broken, the connection button looks like
again,
and "Gauge is disconnected"
will appear in the status line.
4
If the Configurator is connected successfully to the fuel gauge, it
switches to a mode shifts to the gauge periodic polling actions
mode. The polling time can be changed using the properly cell in
the Settings tab and the button
to the right of the cell.
