5
When the drivers are installed, connect the
BI FLSensor
gauge to
the configurator (the driver is installed automatically or is available
through the link
http://www.ftdichip.com/Drivers/VCP.htm
software directory).
Release the slide
by clicking on
the
socket
connector
Keep
the
connector
pressed and close the
slide
switched off
switched on
The power is supplied to the gauge from computer through the
BI
FLSensor Programmer
configurator unit; therefore, it is not necessary
to connect the gauge to a power source separately.
Configurator description
The
BI FLSensor Configurator
software (hereinafter referred to
as the Configurator) is designed for configure the BI FLSensor fuel gauge
and gage the fuel tank.
The main window of the Configurator is shown below:
