Bitmos sat 801+ Скачать руководство пользователя страница 63

Страница: 63 / 75

Pulse Oximeter

Data

9.3 Exporting the data

9.3.1 SD-Card

For further analysis, the stored data can be exported to a micro SD card.

CAUTION!

Whilst the data is being exported, there is no monitoring and therefore no alarms are
activated, should the patient be in a life-threatening situation!

NOTICE!

The pulse oximeter only accepts
empty (erased) micro SD cards. All
other cards will be refused, with an
error message.

Fig. 61: Card not erased

Switch off the device.

With the angled edge to the front
and the exposed contacts facing
downwards, introduce the empty SD
card into the slot until it is firmly in
place.

Fig. 62: Inserting SD card

Switch on the device.
It automatically detects the SD card
and goes into data transmission
mode.

After a short while the data transfer
is complete – for the complete file
about 20 seconds are needed.

Fig. 63: Transmitting data

Содержание sat 801+












































































Результаты поиска

Содержание sat 801+

Отзывы:

Bitmos sat 801+, Руководство пользователя, Страница: 63 / 75

Результаты поиска

Содержание sat 801+

Отзывы: