Bitmos sat 801+ Скачать руководство пользователя страница 56

Страница: 56 / 75

Pulse Oximeter

Alarms

System alarm messages:

Message

Source

SYST ALARM: bat low!

The battery voltage is below a level that guarantees
reliable operation.

SYST ALARM: MS-FIFO!

An error has arisen in the Masimo input data memory.

SYST ALARM: MS-timeout!

The Masimo-circuit board has not responded to several
queries.

SYST ALARM: MS-comm.!

The Masimo-data transfer has a permanent defect.

SYST ALARM: MS-error!

The Masimo circuit board has reported an irreparable
defect.

SYST ALARM: Unexp.reset!

An unexpected device restart has occurred.

SYST ALARM: NVRAM error!

The internal non-volatile memory has reported an error.

SYST ALARM: WDT error!

The integrated circuit that monitors the has
reported an error.

SYST ALARM: Stack overfl.

An error has occurred in the software stack processing.

SYST ALARM: ROM-CRC!

A data security error has occurred.

Defective loud speaker!

The has detected a defective alarm loudspeaker.

Содержание sat 801+












































































Результаты поиска

Содержание sat 801+

Отзывы:

Bitmos sat 801+, Руководство пользователя, Страница: 56 / 75

Результаты поиска

Содержание sat 801+

Отзывы: