BitaTek Cyclops 1D, Руководство по настройкам

Страница: 7 / 75

BlueTooth Scanner Setting Guide
7
3. Key Function Description
The follow table descript the motion of the status and key function.
Motion status
Real mode Hybrid mode Power
Off
Bath mode
HID SPP Disconnect SPP Disconnect
Scan
Key( press
more then
3 seconds) Power
On
1
— — —
Scan Key
+
Function
Key
—
Bluetooth
data transfer
and wait
state mode
2
— —
Scan Key
—
Scan
Function
Key
—
Delete one
recode of
data file
3
Send
key
code
4
Send
key
code
5
Reconnect Send
Key
code
Reconnect
Reset
Button
—
Reset
6
1
This BTS600 will auto Power off
。
Press Scan key and hold more then 3 seconds on the BTS600, it will start on and load the
system configure.
2
When you change it to Bluetooth data transfer mode, BTS600 will wait the host command
from terminal host device include smart phone or tablet device or PC .
3
The scan data will be saved to the file of memory. You can delete the same record on the
data file of memory
。
The last record will be deleted first, even you scan the same data on
the different time. It can not delete multi records on the same time.
It can be set enable or disable according you setting.
4
The software keyboard of iPhone, iPad can be call by press Fn key of BTS600 Via
Bluetooth communication, It can be setting enable/disable different Key code to data
transmit..
5
It can be setting enable/disable different Key code to data transmit
6
The power is off after reset